Controllers
Components
Downloads
Contact
Shows
9 Steps
Home
  • Home
  • Controllers
  • Components
  • Downloads
  • Contact
  • Shows
  • 9 Steps
Panel Mount Style

PIREG-545

ROPEX RESISTRON BRAND

In-Cabinet Style

PIREG-C2

PIREG-C2 EtherNet

ROPEX RESISTRON BRAND

ROPEX® RESISTRON® RES-407

Impulse Sealing Controller – In-Cabinet

The ROPEX Resistron RES-407 is a high response heat seal temperature controller that will deliver precise repeatable sealing temperature every cycle in either impulse or constant heat mode. Designed to operate with or without a PLC interface, the unit is in-cabinet DIN rail mounted. Cycle Start and Temperature Setting can be either local, or remote control with a 24VDC signal. Valuable features include; remote Temperature Set Point Selection and Analog Temperature feedback that can be used for control, display or Datalogger recording. Error Diagnosis makes trouble shooting a snap and the optional Booster Output feature permits extra high power applications.

Perfect for validation, seal time and temperature can be sampled or continuously recorded on the optional companion Datalogger.

Features

  • Both local and remote PLC control
  • Remote analog temperature adjustment
  • Analog Real Time Feedback
  • Easy FDA validation
  • Error Diagnosis and "ALARM"
  • Auto "band break" detection
  • Control multiple bands
  • Conforms to CE and EMC standards
  • Automatic “ZERO” Calibration
  • Booster Output for extra high load applications, optional

QUICK PIREG® CONTROLLER COMPARISON CHART
In-Cabinet vs Panel Mounted – Which "Plug and Play" PIREG® Controller is right for you?

Download Comparison Chart

Description of the Controller

The microprocessor technology endows the Resistron temperature controller RES-407 with previously unattainable capabilities:

  • Very simple operation thanks to AUTOCAL, the automatic zero calibration function.
  • Good dynamic response of the control system thanks to AUTOTUNE, which adapts automatically to the controlled system.
  • High precision thanks to further improved control accuracy and linearization of the heatsealing band characteristic.
  • High flexibility: The AUTORANGE function (as of April 2005) covers a secondary voltage range from 0.4V to 120V and a current range from 30A to 500A.
  • Automatic adjustment to the line frequency in the range from 47Hz to 63Hz.
  • Increased protection against dangerous conditions, such as overheating of the heatsealing band.

The electrically isolated analog interfaces for the temperature set point and the actual temperature (0-10VDC) allow the temperature to be set either directly on the machine PLC or by means of an external potentiometer (PD-x).

Similarly, the real heatsealing band temperature can be visualized either on the display of the machine PLC or on an external temperature meter (ATR-x).

The Resistron temperature controller RES-407 features an integrated fault diagnosis function, which tests both the external system (heatsealing band, wiring etc.) and the internal electronics and outputs a selective error message in case of a fault.

To increase operational safety and interference immunity, all 24VDC logic signals are electrically isolated from the controller and the heating circuit.

Coding switches on the temperature controller itself can be used to adapt to different heatsealing band alloys (TOSS Alloy-20®, NOREX etc.) and set the required temperature range (0...300°C, 0...500°C etc.) on all controllers manufactured as of June 2003.

An external 24VDC auxiliary voltage is required to supply the isolating amplifiers and optocouplers. The compact design of the RESISTRON temperature controller RES-407 and the plug-in connections make this controller easy to install.

Download RES-407 Operating Instructions

Download RES-400 Series Technical Sheet

A wide range of compatible accessories and peripheral devices are available for the PIREG® temperature controllers. They allow it to be optimally adapted to your specific heatsealing application and to your plant's design and operating philosophy.

539 South Main Street, Nazareth, PA 18064 USA · Phone 610-759-8883 · Fax 610-759-1766

©2021 Toss Machine Components, Inc. All rights reserved.     Site Map